LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
LNC Technology Co., Ltd. 91
 SYSTEM UPGRADE
This function offers two ways for update: general disk/RS232 transmission. Please install LNC Technology
Co., Ltd. latest version software if choosing this function. Pressing【YES】, the installation screen will occur.
There is installation program instruction during installation so you only need to follow the instruction to
upgrade the system.
Figure 1.8-10 SYSTEM UPGRADE
At the system upgrade file，move cursor to the line and press【OK】

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English