LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
LNC Technology Co., Ltd. 35
 【DIR SET】
A dialog box of part program menu setting will occur on the screen by pressing this sub-function button.
Users are able to set the part program menu by using this dialog box or by entering work path directly.
Note: The name of the directory can not be the same with our current controller’s files.
Figure 1.4-4 Screen when Setting Part Program Menu

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English