LNC-Lathe New T6-Series
CNC Operation
78 LNC Technology Co., Ltd.
Setting Method：the drawing range of the entering 【SET】screen (0=manual, 1= preview result-full travel,
2= preview result-cutting travel)
0 Manual：preview the drawing range as the reading manual setting’s max/min values.
1 preview result full traveling（including moving path）：preview the drawing range as the reading
part program path’s max/min values, the
smallest value.
2 preview result cutting traveling（only including cutting path）： preview the drawing range as the
max and/or min values of the
reading cutting path, the smallest
value.
Drawing Range (max）： setting to use the manual method to draw the largest value of X, Y, and Z axes
range.
Drawing Range (min）： setting to use the manual method to draw the smallest value of X, Y, and Z axes
range.
Preserve Border：setting the preservation value for【SET】screen border.
Auto Delete：assumed under the condition of not executing program preview. Users are able to choose
whether or not to delete the previous path display screen when enable cutting function while
the machine is doing the path display（0= Not Delete，1=Auto Delete）
Preview reserve：At auto mode, you can set if you want to use previewed graph or to preserve preview.
0 NO：show exact working path.
1YES：show current preview path.
Auto Preview：switch to【GRAPH】to see if the auto preview is processing.
0：start auto preview function. When users change to path page, system will start to do
preview automatically and draw program path.
1：close auto preview function . When users change to path page, system will not start to
do preview automatically and will not draw program path.
To Next Page
Loading...
Need help?
General
