LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
80 LNC Technology Co., Ltd.
【WARN】Warning message is decided by matching with the design of the MLC LADDER. Example is when the
safety door is not closed completely, LADDER program will send out “DOOR NOT CLOSE” message.
Or, when the Coolant Supply is broken, then the message “COOLANT LOW” message will be sent
out. So when the alarm message occurs, please check the conditions of machine and peripheral
equipments according to the LADDER program. The system will stop running when the system sends
out the warning message and the warning message will be displayed on the screen. When the
problem is solved, must press <RESET> to release the warning.

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English