LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
94 LNC Technology Co., Ltd.
Selecting this function, a confirm dialog box will occur：
Figure 1.8-11 Confirm Whether or Not to Do the Hardware Checking
Pressing the confirm button to return back to DOS mode. Users are able to choose to use A drive or C drive.
If users do not choose, the system will use the default C drive. There are 4 types of working items for users
to choose:
（1）anti-virus （2）hard drive scanning （3）hard drive reset （4）exit
Figure 1.8-12 Hardware Checking Function Selection

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English