LSI 3ware 9750 User Manual

Checking Enclosure Component Status
www.lsi.com/channel/products 183
Fan Status
The following is a list of possible fan statuses:
•
OK. The fan is optimal and is functioning normally.
•
Off. The fan is off.
•
Failure. The fan is present, but is malfunctioning.
•
Not Installed. There is no fan installed.
•
Unknown. The status of the fan is not reportable.
Temp Sensor Status
Below is a list of possible temperature sensor statuses.
Note that the temp sensor status indicates the temperature of the enclosure or
backplane. Drive temperature, if supported, is available on the Drive Details
page.
•
OK. The temperature sensor is functioning normally.
•
Failure. The temperature sensor is present, but is malfunctioning.
•
Not Installed. There is no temperature sensor installed.
•
Unknown. The status of the temperature sensor is not reportable.
•
Over Temp Warning. Temperature is higher than normal operating
temperature.
•
Over Temp Fail. Temperature is higher than safe operating temperature.
•
Under Temp Warning. Temperature is colder than normal operating
temperature.
•
Under Temp Fail. Temperature is lower than safe operating temperature.
Power Supply Status
The following is a list of possible power supply statuses.
•
OK. The power supply is functioning normally.
•
Failure. The power supply is present, but is malfunctioning.
•
Off. The power supply is off.
•
Not Installed. There is no power supply.
•
Unknown. The status of the power supply is not reportable.

LSI 3ware 9750 Specifications

General

Brand	LSI
Model	3ware 9750
Category	Controller
Language	English