Installing 3ware Drivers and Software under Mac OS X
www.lsi.com/channel/products 325
4Type: ./install.sh -i
5 Respond to each screen as the script walks you through the installation
process.
6 After the installation is complete, check that the software was installed
correctly.
Uninstalling 3ware Management Software
The following steps describe how to uninstall software on Linux at a
command line, using a text-only interface. You must be root to run the
installer.
1 Navigate to the folder on your computer where 3DM2/CLI are installed.
/
opt/3ware/
Backup files, if needed. All files will be removed during uninstall from:
/opt/3ware
This directory is only for use by the 3ware management software. No user
data should be stored here.
2Type:
./install.sh -u
3 Respond to each screen as the script walks you through the uninstall
process.
4 After the uninstall is complete, check that the software is uninstalled.
Installing 3ware Drivers and Software under
Mac OS X
This section provides detailed instructions for installing the 3ware driver and
the RAID management software running under an Mac operating system.
The following topics are included in this section:
• Driver and Software Installation
• Uninstalling 3ware Software under Mac OS X
Driver and Software Installation
You can install all software at once, or you can use the installer to install
specific components.
To Next Page
Loading...
Need help?
General
