Appendix B. Driver and Software Installation
350 3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
Installing Software from a Graphical User Interface
(GUI)
The steps below describe how to install the 3ware RAID management
software from a windowing graphical user interface such as Microsoft
Windows.
To install the 3ware management software
1 With your computer on, insert the 3ware CD that came with your 3ware
RAID controller.
The CD should automatically launch and display the LSI License
window. If it does not, you can start it manually.
• Under Windows, open
My Computer, select the CD, right-click and
choose
AutoPlay.
• Under Linux, manually mount the CD by typing
mount /dev/cdrom /mnt
Start autorun by typing:
/mnt/autorun
2 When the License screen appears, review and agree to the license in order
to continue.
3 When the 3ware menu appears, click
Install Tools to launch the installer.
The installer will start and the welcome screen appears.
4 From the Welcome screen, click
Next to start the installation process.
Figure 129. Welcome Installation Screen
To Next Page
Loading...
Need help?
General
