Installing 3ware Drivers and Software under Linux
www.lsi.com/channel/products 309
Uninstalling 3ware Management Software
The following steps describe how to uninstall software on FreeBSD at a
command line, using a text-only interface. You must be root to run the
installer.
1 Navigate to the folder on your computer where 3DM2/CLI are installed.
/
opt/3ware/
Backup files, if needed. All files will be removed during uninstall from:
/opt/3ware
This directory is only for use by the 3ware management software. No user
data should be stored here.
2Type:
./install.sh -u
3 Respond to each screen as the script walks you through the uninstall
process.
4 After the uninstall is complete, check that the software is uninstalled.
Installing 3ware Drivers and Software under
Linux
This section provides detailed instructions for installing the 3ware driver and
the RAID management software running under an Linux operating system.
The following topics are included in this section:
• Driver Installation Under Linux
• Obtaining 3ware Linux Drivers
• Driver Installation Under Red Hat or Fedora Core Linux
• Driver Installation Under SUSE Linux
• Compiling a 3ware Driver for Linux
• Updating the 3ware Driver Under Red Hat or Fedora Core
• Updating the 3ware Driver Under SUSE
• Installing Management Software (3DM2 and CLI)
To Next Page
Loading...
Need help?
General
