Chapter 5. 3DM2 (3ware Disk Manager 2) Introduction
50 3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
3 Start the 3DM2 process manually
Open terminal window and type:
sudo /usr/sbin/3dm2
Enter your administrator password, when prompted for it.
The 3DM2 process starts
Open your browser and enter the URL for your system. The default URL
is http://localhost:888/
You can also replace “locahost” with the IP address of the computer that
contains the 3ware controller. For example:
http://<IP address>888/
To manage the 3DM2 daemon manually for OpenSolaris
Consult OpenSolaris documentation for more information. OpenSolaris
System Administrator Collection: http://docs.sun.com/app/docs/coll/47.24
To manage the 3DM2 daemon manually for VMware
1 Login as root on the machine on which 3DM2 is installed.
2Type:
/etc/init.d/tdm2 start|stop|restart
Starting the 3DM2 Process under Microsoft
Windows
3DM2 should start automatically after installation and upon bootup. If it does
not, use the steps below to start it.
To start the 3DM2 process manually
1 On the system on which 3DM2 is installed, login as Administrator.
2 Open
Control Panel >> Administrative Tools >> Services >> 3DM2
and select the
Start/Play icon.
To Next Page
Loading...
Need help?
General
