Installing 3ware Drivers and Software under OpenSolaris
www.lsi.com/channel/products 337
3Type:
./setupSolaris_x86.bin -console
and press Enter.
The application starts in text mode.
4 Respond to each screen as it walks you through the installation process.
The Console installation screens mirror those that display using the GUI
installer. For specific information about the screens, see the previous
section in this document.
To navigate in text mode, type:
1 for Next
2 for Previous
3 to Cancel
5 to Redisplay
0 to Continue Installing
5 After the installation is complete, check that the driver has loaded
correctly.
# modinfo | grep tw
Uninstalling 3ware Software Under OpenSolaris
The following steps describe how to uninstall software on OpenSolaris from
the command line. If you do not use the -console option, the installer will
assume you want GUI mode. You must be root to run the uninstaller.
1 Navigate to the directory where you installed the software. The default
directory is /opt/3ware.
2 Change to the subdirectory “_uninst”.
3 To uninstall in text mode, type:
./uninstall.bin -console and press Enter.
To uninstall in graphical mode, type:
./uninstall.bin and press Enter.
Follow the prompts to remove the installed components.
To Next Page
Loading...
Need help?
General
