Chapter 11. 3DM2 Reference
208 3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
Maintenance page
Figure 103. Maintenance Page
The Maintenance page appears when you choose Management >>
Maintenance
from the menu bar.
The Maintenance page lets you perform maintenance tasks on existing units
on the current controller and lets you create new units by configuring
available drives.
Information about the Maintenance page is organized under these headings:
• Rescan Controller
• Unit Maintenance
• Maintenance Task Buttons for Existing Units
• Available Drives (to Create Units)
• Maintenance Task Buttons for Available Drives
Rescan Controller
The Rescan Controller button scans the ports on the controller. Rescanning
updates the list of available drives shown and updates the status of all attached
disks. If error conditions have been fixed, the status is updated to reflect that.
To Next Page
Loading...
Need help?
General
