Working with Enclosure Alarms
www.lsi.com/channel/products 187
Figure 92. Enclosure Details page with enclosure alarm On
3 In the Audio Alarm Summary section of the Enclosure Details page, do
one of the following:
To turn off the alarm, change the State to Off.
This deactivates and silences the audio alarm.
To mute the alarm, change the Audibility to Mute.
This silences the alarm without deactivating it.
Activated remains in the
Status field.
To unmute the alarm, change the Audibility to Unmute
This causes the alarm to sound again, if it is still active.
Turning Off an Enclosure Alarm in 3BM
In 3BM, you can turn off enclosure alarms that have activated.
To turn off enclosure alarms in 3BM
1 On the main 3BM screen,
Tab to Information and press Enter.
2 On the pop-up menu, select
Enclosures and press Enter.
The Enclosure Information page appears, with information about
enclosure components in the top section, and details about the slots in the
selected enclosure in the bottom section.
To Next Page
Loading...
Need help?
General
