Appendix B. Driver and Software Installation
336 3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
9 When the final installation screen lets you know that installation is
complete, click
Finish.
Figure 124. Final Installation Screen
10 If you are prompted, restart your computer to load the driver.
You can now use the 3ware BIOS Manager (3BM), the 3ware Disk
Manager (3DM2), or the 3ware command line interface (CLI) to create
and manage RAID units.
Instructions for using the CLI are available in3ware SATA+SAS RAID
Controller Card CLI Guide, Version 10.2
Installing the Driver and Software from the
Command Line
The following steps describe how to install software on OpenSolaris at a
command line, using a console application. You must be root to run the
installer.
To install the driver and software on OpenSolaris from the
command line
1 Download the LSI 3ware OpenSolaris installation image from
http://www.lsi.com/channel/ChannelDownloads and mount the image or
burn it to a CD-ROM disc.
2 Navigate to the folder on the mounted image or CD that contains the
installer.
packages/installers/tools/solaris/opensolaris
To Next Page
Loading...
Need help?
General
