LSI 3ware 9750 User Manual

Appendix B. Driver and Software Installation
316 3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
4 For 2.6 Kernels, add the following line to /etc/modprobe.conf
alias scsi_hostadapter 3w-sas
5 Update the modules.dep file, by issuing the following command:
/sbin/depmod -a
6 Run mkinitrd by entering the following:
/sbin/mkinitrd -v -f /boot/initrd-<kernel string>.img
<kernel string>
where <kernel string> is the /lib/modules directory from which to copy
the 3w-sas driver.
Example:
/sbin/mkinitrd -v -f /boot/initrd-2.6.18-14.img 2.6.18-14
7 If you are using the GRUB boot loader, skip to Step 8.
If you are using the LILO boot loader, run LILO to update the boot record
on disk by typing the following:
/sbin/lilo
The output should be similar to:
Added linux *
8Reboot.
The 3ware kernel driver module will be loaded from the ram disk
automatically at boot time.
To install the 3ware kernel driver module and load the module
manually instead of using a RAM disk
1 Log in as root and open a console window.
2 Mount the CD which contains the 3ware kernel driver module.
To mount the CD, type:
mount /dev/cdrom /mnt and press Enter.
3 Copy the kernel driver module.
For Redhat Linux on Intel x86 and AMD x86, type:
cp /mnt/packages/drivers/linux/redhat/<version>/x86/
3w-sas.<ko or pae> /lib/modules/
<kernel string>/kernel/
drivers/scsi/3w-sas.ko
For Fedora Core on Intel x86 and AMD x86, type:
cp /mnt/packages/drivers/linux/fedora/<version>/x86/
3w-sas. <ko, 586, or pae> /lib/modules/
<kernel string>/
kernel/drivers/scsi/3w-sas.ko
If prompted to overwrite, type y.

LSI 3ware 9750 Specifications

General

Brand	LSI
Model	3ware 9750
Category	Controller
Language	English