Working with the 3DM2 Screens
www.lsi.com/channel/products 53
• Drive Information
The
Management menu gives you access to the following tasks for
managing controller-level settings and for maintaining individual units.
• Controller Settings
• Background Task
• Unit Polices
• Unit Names
• Other Controller Settings
• Scheduling
• Rebuild Schedule
• Verify Schedule
• Self-Test Schedule
• Maintenance
• Rescan
• Unit Maintenance
• Available Drives
The
Monitor menu gives you access to the following pages: Alarms page,
Battery Backup page, and Enclosure Summary page.
• The Alarms page:
• List of AENs
• Severity of the event
• Exact date and time it occurred
• The Battery Backup page:
• Status of a BBU
• Battery voltage
• Battery temperature
• Battery installation date
• Test battery capacity
• The Enclosure Summary page:
• Provides a list of enclosures connected to your controller
• Provides basic information about any enclosures attached to your
system.
The
3DM2 Settings page lets you set preferences, including email
notification for alarms, passwords, page refresh frequency, whether remote
access is permitted, the communication port which 3DM2 will use for
listening, and whether command logging is enabled.
To Next Page
Loading...
