Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-54Lines and Trunks
3
● Single Line Procedure
Console/Display Instructions Additional Information PC
! Specify entry mode.
Select
(QWU\0RGH.

! Enter the number of the line/trunk with touch-tone dialing.
! Assign or remove touch-tone signaling from the line/trunk.
Select
(QWHU or

'HOHWH.

You may continue to assign or remove
touch-tone signaling from additional
lines/trunks by repeating Steps 2 and 3.
! Return to the System Programming menu.
Select
([LW three times.

2XW7UXQN'LDO
(QWHU7UXQNVZ7RXFK7RQH
'HOHWH
%DFNVSDFH
([LW (QWHU
Dial or type [ nnn ].
Ã

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English