Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-76Lines and Trunks
3
● Single Line Procedure
Console/Display Instructions Additional Information PC
! Specify entry mode.
Select
(QWU\0RGH.

! Enter the line or trunk with the specified queue priority.
! Assign or remove the line/trunk from the specified QCC priority level.
Select
(QWHU or

'HOHWH.

You may continue to assign or remove the QCC
priority level from additional lines/trunks by
repeating Steps 2 and 3.
! Continue to assign or remove lines or trunks, or go to Step 5.
Select
1H[W.

Return to Step 2. The next QCC priority level is
displayed on Line 1.
! Save your entry.
Select
(QWHU.

! Return to the System Programming menu.
Select
([LW twice.

4&&3ULRULW\ Y 
(QWHUOLQHWUXQNQXPEHU
Dial or type:
Ã
'HOHWH
Trunk number [ nnn ]
%DFNVSDFH 1H[W
Slot and port number [ sspp ]
([LW (QWHU
Logical ID number #[ nnn ]

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English