Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-87Lines and Trunks
3
Console/Display Instructions Additional Information PC
! Enter the slot number of the module to contain the primary system clock.
! Save your entry.
Select
(QWHU.

If the slot selected in Step 5 contains a 100D
module, continue with Step 7.
If the slot selected in Step 5 contains an
800 NI-BRI module, go to Step 8.
! Specify whether the clock is to be synchronized to an outside endpoint (loop) or
is to be free running (local), then go to Step 9.
! Select the 800 NI-BRI module port to be the primary clock source.
! Save your entry.
Select
(QWHU.

3ULPDU\6\VWHP&ORFN
(QWHUVORWQXPEHU
YY
'HOHWH
%DFNVSDFH
([LW (QWHU
Dial or type [ xx ].
Ã
3ULPU\&ON6RXUFH6ORW YY 
xx = slot number entered in Step 5
6HOHFWRQH
/RRS
/RFDO
Select /RRS or

([LW (QWHU
/RFDO.

3ULPDU\/RRS&ON6ORW YY 
(QWHUSRUWQXPEHU
Y
%DFNVSDFH
([LW (QWHU
Dial or type [ x ].
Ã

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English