Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-88Lines and Trunks
3
Console/Display Instructions Additional Information PC
!Select Secondary.
!Enter the slot number of the module to contain the secondary
system clock.
!Save your entry.
Select
(QWHU.

!Specify whether the clock is to be synchronized to an outside
endpoint (loop) or is to be free running (local), then go to Step 15.
&ORFN6\QFURQL]DWLRQ
0DNHDVHOHFWLRQ
3ULPDU\
6HFRQGDU\
7HUWLDU\
([LW

6HFRQGDU\6\VWHP&ORFN
(QWHUVORWQXPEHU
[[
'HOHWH
%DFNVSDFH
([LW (QWHU
Dial or type [ xx ].
Ã
If the slot selected in Step 11 contains a
100D module, continue with Step 13.
If the slot selected in Step 11 contains an
800 NI-BRI module, go to Step 14.
6HFRQGDU\&ON6RXUFH6ORW YY 
xx = slot number entered in Step 11
6HOHFWRQH
/RRS
/RFDO
Select /RRS or

([LW (QWHU
/RFDO.


Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English