Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-98Lines and Trunks
3
Console/Display Instructions Additional Information PC
! Enter the trunk number to copy to.
! Continue to copy options from this trunk to another trunk, or go to Step 5.
Select
1H[W.

Return to Step 3.
! Save your entry.
Select
(QWHU.

! Return to the System Programming menu.
Select
([LW three times.

◆ Block of Trunks Procedure
Console/Display Instructions Additional Information PC
! Enter the trunk number to copy from.
! Save your entry.
Select
(QWHU.

If you get the Station Busy message, wait for an
idle condition or exit system programming and try
again later.
&23<7UXQN YYY 7R
xxx = “copy from” trunk entered in Step 1
(QWHUWUXQNQXPEHU
Dial or type:
Ã
Trunk number [ nnn ]
%DFNVSDFH 1H[W
Slot and port number [ sspp ]
([LW (QWHU
Logical ID number #[ nnn ]
&RS\7UXQN
(QWHUFRS\IURPWUXQN
QXPEHU
Dial or type:
Ã
Trunk number [ nnn ]
%DFNVSDFH
Slot and port number [ sspp ]
([LW (QWHU
Logical ID number #[ nnn ]

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English