Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-99Lines and Trunks
3
Console/Display Instructions Additional Information PC
! Enter the first trunk number to copy to.
! Save your entry.
Select
(QWHU.

If you get the Station Busy message, wait for an
idle condition or exit system programming and try
again later.
! Enter the last trunk number in the block to copy to.
! Save your entry.
Select
(QWHU.

! Return to the System Programming menu.
Select
([LW three times.

&23<7UXQN YYY 7R
xxx = “copy from” trunk entered in Step 1
(QWHUVWDUWLQJWUXQN
QXPEHU
Dial or type:
Ã
Trunk number [ nnn ]
%DFNVSDFH
Slot and port number [ sspp ]
([LW (QWHU
Logical ID number #[ nnn ]
67$57DW7UXQN YYY 7R
xxx = “start copy to” trunk entered
(QWHUHQGLQJWUXQN
in Step 3
QXPEHU
Dial or type:
Ã
Trunk number [ nnn ]
%DFNVSDFH
Slot and port number [ sspp ]
([LW (QWHU
Logical ID number #[ nnn ]

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English