MERLIN LEGEND Communications System Release 6.1
System Programming Guide
555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-164DID Trunks
3
● Single Line Procedure
Console Display/Instructions Additional Information PC
! Specify entry mode.
Select
(QWU\0RGH.
! Enter the trunk number.
! Assign or remove the trunk.
Select
(QWHU or
'HOHWH.
You may continue to assign or remove DID
trunks from the block by repeating Steps 2 and 3.
! Continue to enter trunks for the other trunk block or go to Step 5.
Select
1H[W.
Return to Step 2. The block is
displayed on Line 1.
! Save your entry.
Select
(QWHU.
! Return to the System Programming menu.
Select
([LW three times.
%ORFN
Y
x
= block entered in Step 4
(QWHUOLQHWUXQNQXPEHU
'HOHWH
%DFNVSDFH 1H[W
([LW (QWHU
Dial or type [
nnn
].
Ã