Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-345Optional Extension Features
3
Primary Cover Ring Delay 3
The Primary Cover Ring Delay option replaces the Delay Ring Interval
programmed on a systemwide basis in releases prior to Release 4.1.
Use this procedure to specify the following:
■ The delay before a Primary Cover button programmed for Delay Ring
begins to ring audibly
■ The delay in addition to the Group Coverage Ring Delay before sending
calls to Group Coverage when the sender has Primary or Secondary
Coverage
and any receiver is available
The Primary Cover Ring Delay is programmed for each sender’s extension.
Summary: Primary Cover Ring Delay 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 4b, Analog Multiline Telephone
Form 4d, MLX Telephone
Form 4e, MFM Adjunct: MLX Telephone
Form 4f, Tip/Ring Equipment
Form 5a, Direct-Line Console (DLC): Analog
Form 5b, Direct-Line Console (DLC): Digital
Form 5c, MFM Adjunct: DLC
Factory Setting 2 rings
Valid Entries 1–6 rings
Inspect No
Copy Option No
Console Procedure
([WHQVLRQV→More→More→&RYHU'HOD\→3ULPDU\→
Dial sender’s extension→(QWHU→Dial no. of rings (1–6)→
(QWHU→([LW
PC Procedure

→→→→→Type sender’s
extension
→→Type no. of rings (1–6)→ →

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English