Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-382QCC Optional Features
3
Console Display/Instructions Additional Information PC
! Save your entry.
Select
(QWHU.

! Specify the operator position.
! Assign or remove the operator from Group Coverage calls.
Select
(QWHU or

'HOHWH.

You may continue to assign or remove QCC
operators from Group Coverage calls by
repeating Steps 4 and 5.
! Assign operators to the receive calls from the next Group Coverage number or
go to Step 7.
Select
1H[W

Return to Step 4. The next Group Coverage
number displays on Line 1.
! Return to the System Programming menu.
Select
([LW five times.

2SHUDWRU*US&RYHUDJH YY  
xx = number entered in Step 6
(QWHU4&&RSHUDWRU
H[WHQVLRQQXPEHU
If no DSS is attached:
SP: “Entering an Extension”
Ã
'HOHWH
If DSS is attached:
%DFNVSDFH 1H[W
Toggle the red LED on or
([LW (QWHU
off as required. Go to Step 6.
On = operator receives Group Coverage
calls.
Flashing = operator does not receive
Group Coverage calls.
Off = extension is not an operator position.

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English