Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-405Optional Group Features
3
Console/Display Instructions Additional Information PC
! Select Group Coverage.
! Enter the number of the coverage group (
nn = 1 to 30).
! Save your entry.
Select
(QWHU.

! Specify the extension.
! Assign or remove the extension from the coverage group.
Select
(QWHU or

'HOHWH.

You may continue to assign or remove
extensions from the coverage group by
repeating Steps 5 and 6.
([WHQVLRQV
0DNHDVHOHFWLRQ
([W6WDWXV $565HVWUFW
*URXS3DJH 0LF'LVDEOH
*URXS&RYHU 5HPRWH)UZG
*US&DOOLQJ $XWK&RGH
([LW 'HOD\)UZG

*URXS&RYHUDJH
(QWHUJURXSQXPEHU
%DFNVSDFH
([LW (QWHU
Dial or type [ nn ].
Ã
*URXS&RYHU YY 6HQGHUV
xx = number entered in Step 4
(QWHUH[WHQVLRQV
If no DSS is attached:
SP: “Entering an Extension”
Ã
'HOHWH
%DFNVSDFH 1H[W
If DSS is attached:
([LW (QWHU
Toggle the red LED on or
off as required. Go to Step 8.
On = extension is sender in coverage group
Off = extension is not sender in coverage group

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English