Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-406Optional Group Features
3
Console/Display Instructions Additional Information PC
! Continue to assign the extension to another coverage group or go to Step 9.
Select
1H[W 
Return to Step 6 to continue
programming. The next coverage group
is displayed on Line 1.
! Return to the System Programming menu.
Select
([LW twice.

Group Coverage Delay Interval 3
Use this procedure to specify the number of rings before a call is sent to group
coverage receivers.
NOTE:NOTE:NOTE:
This setting is for Release 4.0 and earlier systems. Use Group Coverage
Ring Delay for Release 4.1 and later systems.
Summary: Group Coverage Delay Interval 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 7c, Group Coverage
Factory Setting Not applicable
Valid Entries Extension numbers
Inspect Yes
Copy Option No
Console Procedure
2SWLRQV→More→&RYHU'HOD\→Drop→(QWHU→
Dial no. of rings→(QWHU→([LW
PC Procedure

→→→7
+
I→Type no. of rings→→

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English