Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-484System Features
3
Console/Display Instructions Additional Information PC
! Erase the current reminder service time (
xxxx ) if assigned.
! Enter the time of day when all reminders are to be canceled
(
hh = 00 to 23 and mm = 00 to 59).
To deactivate Reminder Service Cancel, do not
enter a time. Go to Step 5.
Dial or type [
hhmm ]. Ã
! Save your entry.
Select
(QWHU.

! Return to the System Programming menu.
Select
([LW.

Redirect Outside Calls to Unassigned Extension
Numbers 3
Use this procedure to specify the extension number to receive redirected calls.
Redirected calls include calls made to unassigned numbers by remote access
users, by users on DID trunks (Hybrid/PBX only), or by users on dial-in tie trunks.
Calls can be redirected to the following locations:
■ The QCC queue (Hybrid/PBX only)
■ Another extension number
■ A calling group
This setting does not affect calls received on DID trunks if you have specified that
calls to unassigned DID extensions are to receive a fast busy signal. See “Invalid
Destination” on page 181.
5HPLQGHU6HUYLFH&DQFHO
(QWHUKRXUDQG
PLQXWH
YYYY
%DFNVSDFH
([LW (QWHU
Press Drop.
7/I

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English