Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-181DID Trunks
3
Console Display/Instructions Additional Information PC
! Save your entry.
Select
(QWHU.

! Return to the System Programming menu.
Select
([LW twice.

Invalid Destination 3
Use this procedure to specify where to direct outside calls (received on DID
trunks) for unassigned extension numbers. Calls can be either directed to a
backup position (normally the primary system operator) or given a fast busy
signal. See “QCC Operator to Receive Call Types” on page 3–379
for information
on assigning a backup position.
Summary: Invalid Destination 3
Programmable by System Manager
Mode Hybrid/PBX
Idle Condition Not required
Planning Form Form 3d, incoming Trunks: DID
Factory Setting Backup (calls are sent to the primary system operator)
Valid Entries Backup, Fast Busy
Inspect No
Copy Option No
Console Procedure
/LQHV7UXQNV→','→,QYDO'VWQ→6HQGWR%DFNXS
([WHQVLRQ or 5HWXUQ)DVW%XV\→(QWHU→([LW→([LW
PC Procedure

→→→
or
→→→

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English