Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-585Night Service
3
● Extensions Procedure
Console/Display Instructions Additional Information PC
! Specify the extension you want to assign to the Night Service group.
! Assign or remove the extension(s) from the Night Service group.
! Return to the System Programming menu.
Select
([LW twice.

◆ Calling Group Procedure.
Console Display/Instructions Additional Information PC
! Enter the extension of the calling group to be added.
1LJKW6HUY*URXS YYYY 
xxxx = number entered in Step 4
(QWHUH[WHQVLRQ
If no DSS is attached:
SP: “Entering an Extension”
Ã
'HOHWH
%DFNVSDFH 1H[W
If DSS is attached:
([LW (QWHU
Toggle the red LED on or
off as required. Then, go to Step 3.
On = extension assigned to group
Off = extension not assigned to group
1LJKW6HUY*URXS YYYY 
xxxx = number entered in Step 4
(QWHUH[WHQVLRQ
YYY
Select (QWHU to assign or

'HOHWH to remove your entry and

'HOHWH
continue adding or removing extensions
%DFNVSDFH 1H[W
from the Night Service group by
([LW (QWHU
repeating Steps 1 and 2.
Select
1H[W to save your entry and

begin assigning extensions to the
next
Night Service group (operator position).
1LJKW6HUY*URXS YYYY 
xxxx = number entered in Step 4
(QWHUJURXSFDOOH[W
'HOHWH
%DFNVSDFH 1H[W
([LW (QWHU
Dial or type [ nnnn ].
Ã

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English