Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-590Night Service
3
Console/Display Instructions Additional Information PC
!Specify the extension.
!Assign or remove the extension(s) from the exclusion list.
Select
(QWHU or

'HOHWH.

Continue to add or delete extensions by
repeating Steps 14 and 15.
!Return to the System Programming menu.
Select
([LW twice.

Night Service with Time Set 3
Use this procedure to specify the time of day and the days of the week when Night
Service is to be activated and deactivated.
Enter the time of day as four digits, using 24-hour notation. Enter the day of the
week as a single digit (0 to 6), with 0 being Sunday. If you enter an invalid number,
the system truncates the number.
If you change the system time while Night Service is active, Night Service is
deactivated automatically and you must manually reactivate it.
Operators can override the timer and turn Night Service on and off manually. This
feature can be deactivated when out-of-the-ordinary situations occur (for
example, a midweek holiday).
NOTE:NOTE:NOTE:
For Release 2.1 and earlier, after setting Start and Stop time for Night
Service you must use the following procedure to set the current day of the
week for Night Service.
1LJKW6UYFH→'D\RI:HHN→Dial the current day of the week→(QWHU→([LW
1LJKW6HUY([FOXVLRQ
If no DSS is attached:
(QWHUH[WHQVLRQV
SP: “Entering an Extension”
Ã
H[FOXGHG
If DSS is attached:
'HOHWH
Toggle the red LED on or
%DFNVSDFH
off as required. Then, go to Step 16.
([LW (QWHU
On = extension is excluded from list
Off = extension is not excluded from list

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English