Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-591Night Service
3
If system programming information is being loaded into memory from a backup
diskette, the current day of the week must be reset.
Night Service can be turned off by using the following procedure:
1LJKW6UYFH→'D\RI:HHN→Dial →(QWHU→([LW
Summary: Night Service with Time Set 3
Programmable by System Manager
Mode All
Idle Condition Not required
Planning Form Form 9c, Night Service: Time Set
Factory Setting Not applicable
Valid Entries Day: 0 to 6; Time: 0000 to 2359
Inspect No
Copy Option No
Console Procedure To add or change start/stop time:
1LJKW6UYFH→6WDUW→Drop→Dial start day and time→
(QWHU→6WRS→Drop→Dial stop day and time→
(QWHU→([LW
To activate/deactivate:
1LJKW6UYFH→7LPH&RQWURO→2II or 2Q→(QWHU→([LW
PC Procedure To add or change start/stop time:

→→7
+
I→Type start day and time→ →
→7
+
I→Type stop day and time→→
To activate/deactivate:

→→
or
%→→

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English