Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-642Memory Card
3
Console/Display Instructions Additional Information PC
! Observe the restore progress screen.
!Observe the restore file validation screen.
Restore Messages 3
During the restore procedure, additional screens may appear to alert you to
problems with the translation memory card, the backup file or the restore
procedure. This section contains displays of each screen and information about
what to do if the screen appears.
Card Missing or Card Not Inserted Correctly 3
The memory card is either not inserted or inserted incorrectly. The restore is
aborted. You must reinsert the card and repeat the restore procedure. This screen
may also appear if the wrong type of memory card is inserted and a restore is
requested within one minute of insertion. Verify that the card is a translation
memory card.
5HVWRUH1
n = filename selected in Step 5
5HVWRUHLQ3URJUHVV
3OHDVH:DLW
5HVWRUH1
n = filename selected in Step 5
5HVWRUH6XFFHVVIXOO\
&RPSOHWHG
6\VWHPLV5HVWDUWLQJ
3OHDVH:DLW
The session is finished, and the
system restarts. You must enter system
programming again if you wish to
continue programming.
0HPRU\&DUG5HVWRUH
9HULI\WKDW0HPRU\&DUG
KDVEHHQLQVHUWHG
FRUUHFWO\
([LW

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English