MERLIN LEGEND Communications System Release 6.1
System Programming Guide
555-661-111
Issue 1
August 1998
General Feature Use and Telephone Programming
Page D-15Telephone Programming
D
NOTE:NOTE:NOTE:
MLX display telephones can also be programmed using the method
described for MLX-10 and MLX-5 nondisplay telephones. For example, the
programming mode can be entered by pressing the Feature button and
dialing
00, then referring to the display to continue the programming
process. Or, enter programming by using the display and then dial a
programming code to select the feature rather than selecting it from the
display.
Table D–4. Programming MLX Telephones Using the Display (Continued)
Step Action
4 Select the feature.
If the feature name is on the
display:
If the feature name is not on the
display:
To move through the list of
features page by page,
or
To jump to the screen that
displays the feature name.
Press the button next to or below the name of the
feature to be programmed.
Press More.
Press More.
Select
)LQG)HDWXUH from the display.
Select the range of letters from the display that
corresponds to the first letter of the feature name.
For example, if the feature begins with
$, select $%&.
If the feature is not displayed on the page that you
jumped to, press More.
When you find the feature you want, press the
button next to or below it.
5 Respond to any additional
prompts on the display.
Select the appropriate prompt (for example, select
2Q or 2II to turn inside Coverage on or off), and/or
enter required information (for example, dial a phone
number for Auto Dial).
Select
(QWHU.
6 End programming.
To return to the Home screen:
To return to the Menu screen:
Press Home, or lift and replace the handset.
Press Menu.
To Next Page
Loading...
Need help?
General
