Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
General Feature Use and Telephone Programming
Page D-16Telephone Programming
D
Table D–5. Programming MDC 9000 and MDW 9000 Telephones
Step Action
1 Label the button to be
programmed.
Note: Skip this step if the feature
will not be programmed onto a
button.
Remove the clear label cover from the telephone by
pulling up on the tab that extends from the top of the
cover.
Write the feature name on the card next to the
button to be programmed.
Replace the cover.
2 Begin programming. Press the imprinted Feat button.
Dial
00 .
3 Select the feature or setting. Press the button you labeled.
Note: If the feature does not get programmed onto a
button, press any line button. This does not affect
the button in any way.
Dial the programming code.
The feature is programmed.
4 End programming. Press the imprinted Feat button.
Dial
00 .

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English