Optical Backscatter Reflectometer 4600 111
User Guide
Maximum Length (m)
Features
after the
Maximum Length
will not be
displayed,
when this item is checked
in the Parameter Specifications window (Figure 6-4 on page 83) or the Tolerance
Specification window (Figure 6-8 on page 88). Only the last Peak or Drop before
this length will be displayed.
Default Value: 0.0 m
6
Remote Commands
All of the remote commands available in the OBR control software (See Chapter 7‚
“Controlling the OBR Remotely,” on page 119) are also available in the LightPath
Analysis software, except the following:
CONF:COEF
CONF:COEF?
SYST:COPY
FETC:FDTL?
To Next Page
Loading...
