Luna 4600 - Software Guide

7
Chapter 2
Assembly and Startup
2
The Optical Backscatter Reflectometer is shipped with everything needed to conduct
device characterizations, including the measurement instrument and all supporting
hardware, software, documentation, and cables.
Read and follow all assembly and startup instructions before attempting to operate
the Optical Backscatter Reflectometer.
Warning The protection provided by the equipment may be impaired
if the equipment is used in a manner not specified by the
manufacturer, resulting in serious injury or death.
Components List
The Optical Backscatter Reflectometer is shipped with either a laptop or a PC with
monitor, keyboard and mouse. All other components shown below are shipped with
each OBR instrument.
Optical Backscatter Reflectometer 4600 instrument.
One (1) USB cable to connect the OBR instrument to the PC