Luna 4600 - Page 156

142 Chapter 7
Controlling the OBR Remotely
7
Description: Sets the Spatial Resolution Filter width (ns).
Response:
None.
CONFigure:SpatialResolutionFilterWidth?
Usage:
CONF:SRFW?
Description: Retrieves the Spatial Resolution Filter width in
nanoseconds.
Response: Returns the Spatial Resolution Filter width in
nanoseconds.
CONFigure:GAIN
Usage: CONF:GAIN {gain}
Description: Sets the gain vector index.
Response: None.
CONFigure:GAIN?
Usage:
CONF:GAIN?
Description:
Retrieves the gain vector index.
Response: Returns the gain vector index.
CONFigure:SpatialresolutionFILter
Usage: CONF:SFIL
{0|1}
Description: Sets the Spatial Resolution Filter, or smoothing filter, flag
on (1), or off (0).
Response:
None.
Note: Data can be filtered after a scan.
CONFigure:SpatialresolutionFILter?
Usage:
CONF:SFIL?
Description: Retrieves the Spatial Resolution Filter flag.
Response: Returns “1” if the Spatial Resolution Filter flag is on, “0”
if it is
off.
CONFigure:FrequencydomainWINdow
Usage: CONF:FWIN
{0|1}
Description: Sets the frequency domain window flag, indicating whether
or not a frequency domain window is applied to new