Optical Backscatter Reflectometer 4600 201
User Guide
Packing Procedure
1 Check that all materials to be shipped are ready to be packed using the
“Components List” on page 7.
2 Place the supplied protective cap over the detector port and turn it
clockwise until tightened.
3 Obtain an OBR Shipping Box (#1).
4 Seal the bottom center and edges of the box.
5 Pack the OBR in the OBR Shipping Box using the original styrofoam
insert on each side of the OBR.
6 Pack the user software, the User Guide, the OBR Accessory Pack, and
OBR cables in the OBR Accessory
Box.
7 Place the OBR Accessory Box on top of the OBR.
8 Seal the top of the box, taping the center and open edges.
9 Obtain a Luna Desktop or Laptop PC Shipping Box (#2), as applicable.
10 Seal the bottom center and edges of the box.
11 Pack the PC in the PC Shipping Box using the original styrofoam inserts
on each side of the PC.
12 Pack the PC software and manuals, as well as the mouse, keyboard, and
PC Power Cord in the PC Accessory
Box.
13 Place the PC Accessory Box on top of the re-packaged PC.
14 Seal the top of the box, taping the center and open edges.
9
15 Obtain a Luna Technologies Monitor Shipping Box (#3), if applicable.
Otherwise disregard the remaining
steps.
16 Seal the bottom center and edges of the box.
17 Pack the monitor in the Luna Technologies Monitor Box using the
original styrofoam inserts on each side of the monitor. The Monitor Box
should contain
the
monitor,
the
monitor software
and
manuals,
the power
supply and the power cord.
18 Seal the top of the box, taping the center and open edges.
To Next Page
Loading...
