Viewing Segment Details
91
Comparing a Failing Trace to the Reference 93
Comparing Traces Using the Trace Comparison Window 93
Editing a Reference Trace: Processing Parameters and General Tolerances 94
Setting the Maximum Device Length
95
Resetting the Default Parameters
96
Suggested Setup and Use
97
Description of Processing Parameters and Tolerances 97
Characteristic Length (m)
98
Drop Length (m)
99
Feature Extract Length (m)
100
Peak Detect Ratio (lin)
101
Peak Dead Zone (m)
102
Drop Detect Ratio (lin)
103
Integration Length (m)
104
Return Loss Type
105
Peak Tolerance (dB)
106
Drop Tolerance (dB)
107
Loss Tolerance (dB)
108
Splice Loss Tolerance (dB)
109
Location Tolerance (m)
110
Maximum Length (m)
111
Remote Commands
111
Remote Commands Unique to LPA
112
7. Controlling the OBR Remotely 119
Prerequisites for Remote Control Setup
119
Remote Control Setup Configuration
120
Remote Control Commands for the OBR
120
To Next Page
Loading...
