MacDon PW8 - Setting Maximum Work Height (New Holland CR Series)

214658 135 Revision A
Setting Maximum Work Height (New Holland CR Series)
This procedure applies only to 2015 and later CR models (6.80, 6.90, 7.90, 8.90, 9.90, and 10.90).
1016056
A
Figure 6.124: New Holland Combine Display
1. Select TOOLBOX (A) on main page. The TOOLBOX
page displays.
1016063
A
B
Figure 6.125: New Holland Combine Display
2. Select FEEDER (A). The FEEDER SETUP page
displays.
3. Select MAXIMUM WORK HEIGHT field (B).
1016064
Figure 6.126: New Holland Combine Display
4. Set MAXIMUM WORK HEIGHT to desired value.
5. Press SET and then press ENTER.
PREDELIVERY INSPECTION