MacDon PW8 - Case IH 7010;8010, 7120;8120;9120, 7230;8230;9230, and 7240;8240;9240 Combines; Checking Voltage Range from Combine Cab (Case 8010)

214658 85 Revision A
6.1.4 Case IH 7010/8010, 7120/8120/9120, 7230/8230/9230, and
7240/8240/9240 Combines
Checking Voltage Range from Combine Cab (Case 8010)
NOTE:
Changes may have been made to combine controls or display since this document was published. Refer to
combine operator’s manual for updates.
CAUTION
Check to be sure all bystanders have cleared the area.
1. Raise header until header wheels are 150 mm (6 in.) above ground.
1003676
A
Figure 6.26: Case 8010 Combine Display
2. Select DIAG (A) on Universal display MAIN page. The
DIAG page displays.
1003677
A
Figure 6.27: Case 8010 Combine Display
3. Select SUB SYSTEM (A). The SUB SYSTEM page
displays.
PREDELIVERY INSPECTION