MacDon PW8 - Checking Voltage Range from Combine Cab (New Holland CR Series)

214658 128 Revision A
Checking Voltage Range from Combine Cab (New Holland CR Series)
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the
combine operator’s manual for updates.
CAUTION
Check to be sure all bystanders have cleared the area.
1. Position header 150 mm (6 in.) above ground.
1016049
A
Figure 6.112: New Holland Combine Display
2. Select DIAGNOSTICS (A) on main page. The
DIAGNOSTICS page displays.
1016050
A
Figure 6.113: New Holland Combine Display
3. Select SETTINGS (A). The SETTINGS page displays.
PREDELIVERY INSPECTION