Introduction
This manual contains the unloading, setup, and predelivery requirements for the MacDon PW8 Combine Pick-Up
Header for North America.
Carefully read all the material provided before attempting to unload, assemble, or use the machine.
The header can be configured for the following combines:
Combine
Model
Case IH 50/60/7088, 51/61/7130, 51/61/7140, 70/8010, 71/81/9120, 72/82/9230, and 72/82/9240
John Deere
96/97/9860STS, 96/97/9870, S650/660/670/680/690, 9660WTS, and T670
New Holland
All CR/CX Series
Versatile RT490
When setting up the machine or making adjustments, review and follow the recommended machine settings in all
relevant MacDon publications. Failure to do so may compromise machine function and machine life and may result
in a hazardous situation.
NOTE:
Keep your MacDon publications up-to-date. The most current version can be downloaded from our website
(www.macdon.com) or from our Dealer-only site (https://portal.macdon.com) (login required).
214658 i Revision A
To Next Page
Loading...
