MacDon PW8 - Page 38

214658 30 Revision A
1007122
A
B
B
Figure 3.36: Driveline Bracket
7. Position bracket (A) against header frame and locate
the preinstalled bolt (B) into the upper slot in frame.
8. Swivel bracket (A) so that slot in bracket engages
bolt (B) in lower slot in frame.
9. Tighten the two nuts.
1007123
A
Figure 3.37: Driveline in Repositioned Bracket
10. Place driveline in bracket ensuring locking disc (A)
secures driveline in bracket.
UNLOADING THE HEADER