EasyManua.ls Logo

Maeda CC1485S-1 - Grease Pump Holder; Cup Holder; Retractable Seat Belt Handling

Maeda CC1485S-1
370 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
129
2.20 GREASE PUMP HOLDER
This is located in the left door on the rear left. If you are
not using the grease pump, hang it on this holder.
2.21 CUP HOLDER
This is located on the left side in the cab.
2.22 RETRACTABLE SEAT BELT HANDLING
・
Before wearing the seat belt, check that the belt mounting bracket and installed belt have
no abnormality.
If they are worn or damaged, replace them with new ones.
・
Replace the seat belt with a new one every three years even if there is no abnormality on
the belt appearance.
"The date of manufacture" is woven in the back of the belt.
・
Be sure to wear the seat belt during operation.
・ Do not wear the seat belt in a twisted condition.
As this seat belt has a retractable device, it is not
necessary to adjust the length.
[1] HOW TO WEAR SEAT BELT
Pull out the belt from the retractable device (1) holding the
grip (2) and check that there is no twisting. Then, insert
securely the insertion section (3) into the buckle (4).
At this time, pull the belt lightly and check that the belt is
securely locked.
[2] HOW TO UNFASTEN SEAT BELT
When the button (5) of the buckle (4) is pressed, the insertion section (3) comes off from the buckle
(4).
As the belt is automatically retracted, hold the grip (2) and slowly return it to the retracting device
(1).

Table of Contents