39
4. MAINTENANCE PRECAUTIONS
4.1 PRECAUTIONS BEFORE MAINTENANCE
PUT UP A WARING SIGNBOARD DURING INSPECTION/MAINTENANCE
• When warning sign "DANGER. DO NOT OPERATE!" is put
up, the Machine is being inspected and under
maintenance. Do not start the engine and refrain from
touching operating levers. Disregarding the warning sign to
operate the Machine may give rise to the danger of
involving the preparing personnel into the rotating parts or
movable parts of the Machine, resulting in serious injury.
•
Put up additional warning signs around the Machine as
required.
Part number of warning signboard: 585-4738300
When this warning signboard is not used, store it in a tool
box. If no tool box is available, keep it in a holder for the
instruction manual.
• Always tidy away tools, hammers and
other things that obstruct the working area; grease
and oil should be wiped off immediately after use to assure safe operations.
An untidy workplace may cause safety hazards and result in injuries to personnel.
• For inspection and maintenance, select an area with flat and solid ground.
• Select such a place where no risk of landslide, rock fall or flooding is feared.
KEEP AWAY UNAUTHORIZED PERSONNEL
During maintenance servicing of the Machine, never allow any personnel except the required
Appoint monitoring personnel as required.
FOLLOW SUPERVISOR'S INSTRUCTION DURING TEAMWORK
Appoint a person who supervises the work and follow his/her instructions in case of Machine
repair or installing/uninstalling a work device.
Unexpected accidents due to misunderstood communication between workers may occur
during teamwork.
To Next Page
Loading...
