When the track frame faces backward (when the sprocket is in the front), the direction of
the travelling lever operation is opposite to the direction of the machine movement.
• Do not allow anyone around the machine.
• Clear away all the obstacles on the travelling path.
• Check the safety in the vicinity of the machine and honk the horn before starting to move
the machine.
• The rear of the machine body is a blind spot. Be sure to check the rear of the machine
body with a rear view camera before performing backward travel operation.
• Be careful that when the travelling lever is operated during auto decel operation, engine
speed suddenly increases.
• Use the accelerator pedal only when the machine stops and you operate the crane. Never
use this pedal during travel operation. An operation mistake may be made, resulting in
serious physical injury.Use the fuel adjustment dial to adjust engine speed during travel
operation.
• Check that the travelling alarm operates properly during travelling.
• The slewing operation and boom retraction operation are possible during travelling but
do not perform any crane operation. Stop the machine before performing crane operations
[Preparation for starting]
1. Turn the fuel adjustment dial (3) to the full rotation position
(MAX) to increase the engine speed.
To Next Page
Loading...
