After loading the machine to the specified position of the trailer, fix the machine in the following steps.
1. Place the lock lever (1) securely in the lock position (L).
2. Stop the engine and remove the starter switch key.
3. Close all the doors, windows and covers.
Lock the door, covers and caps with lock.
4. Put blocks of wood in front and back of the crawler to
prevent the machine from moving during transportation and
use chains or wire ropes of appropriate strength for secure
fixing.
Especially, at this time, properly fix it so it will not
move from side to side.
At this time, put nailing strips between the wire rope and
machine so that the wire rope and machine are not
damaged.
To Next Page
