164
3.12 INSPECTION AND CHECK AFTER COMPLETING WORK
3.12.1 AFTER STOPPING ENGINE
1. Check for oil and water leaks and conduct a walk-around check of the crane, exterior and
undercarriage.
If you find any leakage or abnormality, fix the problem.
2. Fill up the fuel tank to full.
3. Remove paper and dead leaves in the engine compartment and around the battery because they
may cause a fire.
4. Remove mud adhered to the undercarriage.
3.12.2 LOCKING
Be sure to lock the caps and covers with lock.（2．14 See caps and covers with lock.)
To Next Page
